Brunny P.o. Blocks

These slide blocks are designed to take your skating to the next level, with a wide surface area that provides superior stability and control, smooth edges that prevent dreaded wheel bite, and a curvature that grips the coping like a constrictor.

These blocks are also specifically engineered to enhance your slides, stalls, and grinds, with the slickest material in the game that will have you sliding and grinding with the speed and agility of a snake on the hunt.

⚠️ Do Not Use Labrys Trucks on the 253mm Magic Hex plate with XL slide blocks as the trucks will touch the slide blocks putting them under extreme pressure. It will damage the plate, the slide blocks and the trucks and we are not responsible for any damages with this combination setup. If you wish to skate XL slide blocks and HEX plate 253mm please use different trucks or modify the slide blocks, at your own risk, so it doesn't touch the trucks

**Limited stock**

Coming with :

- A mounting bar set

- Allen key

- Wrench key 8

- 4 nuts

- 4 bolts

Compatibility:

To make sure you select the right size please refer to our size charts and measure the distance between your plate inner kingpin. It is up to you to make sure you select the correct size and we won't be able to refund or replace your order if the slide blocks doesn't fit your setup or if the slide block wasn't mounted properly to your plate.

SureGrip: Sunlite, Avanti, Rock

Chuffed: Stock plate

Moxie: Stock plate

Bont: Tracer

Chaya Kismet + Karma ( Need 10mm cushion )

Apollo: Crazy

We are pleased to say the Pro Blocks are compatible with 20degree plates, but you will need a bit of elbow grease to bend the end of the hanger to install it properly.

It's in the nature of steel to bend if there is a gap between your plate and the mounting bars. We definitely recommend using plates without gap such as the HEX Plate, Sunlite plate to avoid the mounting bars to bend. Please pay attention when installing slide blocks on your skate as we are not responsible for the mounting bars to bend and can't offer replacement.

Some plates such as Avanti can need the mounting bar to be tighten around the kingpins with a pair of pliers, at your own risk, for a better fitting.

Please check plate compatibility before purchasing or skating your blocks. If the Pro Blocks are not right for your skates, we are not able to refund you if the blocks are not in their original condition.

Happy Shredding!!